| Specification |
Standard and bespoke sizes available.
Single tank aqueous ultrasonic cleaning system with the following features: |
- All stainless steel
- BSP drain valve
- Heated tank
- Thermostatically controlled
- Bolt in transducer plate
- Separate generator (see below)
- Tank size (range of sizes)
- Overall size (to suit requirements)
|
- Capacity (variations)
- Industrial standard - continually rated
- Insulated frame
- Basket & lid inclusive
- Table top mounted
- Operates from standard mains volatage
- CE certified
|
|
|
|
Industrial Benchtop Ultrasonic Cleaner 
|
| Ultrasonic Generator Specification |
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
|
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified
|
|
|
|
Ultrasonic Generator & Immersibles  |
| Immersible Transducer Specification |
- Hermetically sealed welded housing
- Manufactured entirely from 316 stainless steel
- Aluminium bars permanently bonded to the underside of the active face
- Piezoelectric transducers mounted, in pairs, to the aluminium bars
|
- Stainless steel braided flexible hose with PTFE bore
- Special bulkhead fitting if required
- Terminal box with co-axial cable and plug for connection to the generator
- PTFE sealing washer for leak tight joint below fluid level
- CE Certified
|
|
|
|
Ultrasonic Immersibles
 |
Introduction to Ultrasonic Cleaning
