Spray Washers

Spray Washers

Layton Technologies has teamed with Teijo-Viverk, to supply Scandinavia’s most popular range of single and multi-stage spray washers and tunnel wash machines.

 

 

Spray and ultrasonic cleaning of sintered metal sheet

  • Full UK support from an experienced
    manufacturer
  • Proven technology systems
  • Supplied with aqueous cleaning chemistry if required

 

Teijo - Top loading machine A cleaning machine in which a water-based cleaning cycle is carried out in an enclosed cabinet.The cleaning process involves hot alkaline cleaning fluid being sprayed from the rotary spray system onto stationary parts. Top loading machineA cleaning machine in which a water-based cleaning cycle is carried out in an enclosed cabinet.The cleaning process involves hot alkaline cleaning fluid being sprayed from the rotary spray system onto stationary parts.The machine consists of

  • washing cabinet
  • rotating spray system
  • pump
  • heating system
  • filtration system
  • fluid guard
  • load basket
  • electrical centre
Teijo - 	 Single-Stage  The single-stage machines are manufactured in six sizes, c-800 to c-2600. The number states the rotational diameter of the spray pipe in millimetres. Single-StageThe single-stage machines are manufactured in six sizes, c-800 to c-2600. The number states the rotational diameter of the spray pipe in millimetres.

This machine is suitable for most cleaning needs in industrial production e.g for

  • cleaning of components before welding
  • cleaning of machined parts
  • cleaning of components before intermediate and final assembly

These machines are also used in the service sector:

  • for cleaning of motors, gearboxes and other components.
    • in service workshops for passenger cars and lorries
    • in service workshops for engine remanufacture
    • in workshops at vocational schools/colleges
  • in industrial maintenance workshops
Teijo - Multi-Stage  In a multi-stage machine cleaning cycles are performed in a single cabinet. The automatic cleaning process involves hot cleaning fluid being sprayed from the rotary spray system onto stationary parts.A multi-stage machine is idea for grease removal, cleaning, rinsing and phosphating of metal components. Multi-StageIn a multi-stage machine cleaning cycles are performed in a single cabinet. The automatic cleaning process involves hot cleaning fluid being sprayed from the rotary spray system onto stationary parts.A multi-stage machine is idea for grease removal, cleaning, rinsing and phosphating of metal components.

For more information about these systems please contact teijo@laytontechnologies.com

Or alternatively please use our enquiry form